Hardware Requirements
To run FarmStream Fleet, a vehicle must have an FmX® integrated display, a GFX-750™ display, or a TMX-2050™ display installed. FarmStream Fleet can use one of many wireless connectivity options including the DCM-300 modem as well as the GX450 modem, SNM941 modem, Wi-Fi, and WAN gateways.
Customers may use the PIQ or FmX+ app on the TMX-2050 display or the PIQ app on the GFX-750 display. The PIQ app prior to version 5.50 firmware for TMX or 1.50 firmware for GFX-750 has limited FarmStream functionality only.
Customers who have the DCM-300 modem and the FmX or TMX-2050 display set up on a vehicle can choose whether they want to use the traditional or FarmStream version of Fleet for that vehicle. Customers who own these devices can use FarmStream and traditional Fleet on different vehicles in their fleet and see the data from both versions of Fleet in one organization.
Customers using traditional Fleet can still use the DCM-300 modem to track their fleet’s utilization, but the traditional Fleet does not link with the display and provides utilization data solely based on vehicle movement and the optional use of an implement switch.
The following table summarizes the hardware options for traditional Fleet:
| Hardware used | Description and requirements |
| DCM-300 modem, no display | This version of the traditional Fleet uses the DCM-300 modem to obtain utilization data based on vehicle movement and the optional use of an implement switch. |
| DCM-300 modem, TMX-2050 display |
This version of the traditional Fleet uses the DCM-300 modem to obtain utilization data based on vehicle movement and optional use of an implement switch. It does not link the DCM-300 modem with the TMX-2050 display. |
| DCM-300 modem, FmX display |
This version of the traditional Fleet uses the DCM-300 modem to obtain utilization data based on vehicle movement and optional use of an implement switch. It does not link the DCM-300 modem with the FmX display. |
The following table summarizes the hardware options for FarmStream Fleet:
| Hardware used | Description and requirements |
| DCM-300 modem, FmX display | If the DCM-300 modem is used with FarmStream Fleet, it is only used as a modem and not as a vehicle CAN interface. The FmX display requires version 10.01 or higher firmware. |
| DCM-300 modem, TMX-2050 display |
If the DCM-300 modem is used with FarmStream Fleet, it is used only as a modem and not as a CAN interface. The TMX-2050 display requires version 4.3.1 or higher firmware for the FmX+ app and version 5.50 or higher for the PIQ app. |
| GX450 or SNM941 modem, FmX display | If the GX450 or SNM941 modem is used with FarmStream Fleet, it is used only as a modem and not as a CAN interface. The FmX display requires version 10.01 or higher firmware. |
| GX450 or SNM941 modem, TMX-2050 display | If the GX450 or SNM941 modem is used with FarmStream Fleet, it is used only as a modem and not as a CAN interface. The TMX-2050 display requires version 4.3.1 firmware for the FmX+ app and version 5.50 or higher for the PIQ app. |
| Third party WAN gateway device, FmX display | FarmStream Fleet may be used with a third-party WAN gateway device for connectivity, such as a cellular device. It must be connected to the display. The FmX display requires version 10.01 or higher firmware. |
| Third party WAN gateway device, TMX-2050 display |
FarmStream Fleet may be used with a third party WAN gateway device for connectivity, such as a Wi-Fi or cellular device. Smartphone tethering may be used as a source of connectivity for the TMX-2050 display. The TMX-2050 display requires version 4.3.1 or higher firmware for the FmX+ app and version 5.50 or higher for the PIQ app. |
| GX450 or SNM941 modem, GFX-750 display |
If the GX450 or SNM941 modem is used with FarmStream Fleet, it is used only as a modem and not as a CAN interface. The GFX-750 display requires version 1.50 firmware or higher for full FarmStream functionality. |
| Third-party WAN gateway device, GFX-750 display |
FarmStream Fleet may be used with a third-party WAN gateway device for connectivity, such as a Wi-Fi or cellular device. Smartphone tethering may be used as a source of connectivity for the GFX-750 display. The GFX-750 display requires version 1.50 firmware or higher for full FarmStream functionality. |